AEMC CA7024 WIRE MAPPER PRO

The Wire Mapper Pro® Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTPand SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/ B ( ISO11801 and EN 50137) , USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. In the event of opens and shorts, the Model CA7028 uses TDR technology to indicate if the fault is at the near end or the remote end of the cable, or if it is somewhere in between. It will then indicate the distance to the fault. The Model CA7028 has the ability to measure and indicate the length of the cable under test, using a Vp ( Velocity of Propagation) set by the user, from a built-in library or manually. It will measure and report the length of all four pairs of wires in the cable under test. It also generates an audible tone that is transmitted into all four pairs on the cable under test. This can be used for cable tracing and identification in conjunction with a tone receiver. Specifications: Range : 500 ft ( 150m) Accuracy : ± 5% Cable Types : UTP, STP, FTP & SSTP Faults Indicated : Short Circuit Pair, Open Circuit Wire, Short Between Pairs, ; Split/ Cross Pairs, Pair Reversals, Shield Continuity Fault Location : Near end, remote end or distance to fault Wiring Schemes : TIA 568A/ B, USOC & ISDN Service Indication : Telephone, 10BaseT, 100Mbit+ , Token Ring Test Inhibit : Inhibits testing in the presence of live voltages Tone Generator : Oscillating 810 to 1110Hz Voltage Warning : Audible and visual warning of TNV ( Telecom Network Voltage) presence Display Resolution : 128 x 64 pixel graphical LCD Display Backlight : Blue electroluminescent Fault Display : All fault and setting info displayed textually and graphically Remote Display : Green/ Red Pass/ Fail LED Auto-Off : After 3 minutes Languages : English, French, German, Spanish, Portuguese, Italian Power Source : 4 x 1.5V AA Alkaline batteries Battery Life : Standby mode > 4000 hrs Continuous testing : > 7.5 hrs Battery Life : Indication Bargraph Storage Temperature : -4° to 158° F ( 0° to 70° C) ; 5 to 95% RH non-condensing Operating Temperature : 32° to 112° F ( 0° to 40° C) ; 5 to 95% RH non-condensing Dimensions : Main unit: 6.5 x 3.5 x 1.5 " ( 165 x 90 x 37mm) ; Remote unit: 2.5 x 2.0 x 1.0 " ( 65 x 52 x 25mm) Weight : Main unit: 12 oz ( 350g) ; Remote unit: 1.5 oz ( 40g) Index of Protection : IP54